How Long To Charge Car Battery With Jumper Cables? – Learn To Recharge Dead Battery

We often face dead batteries in our cars, don’t we? In such a situation, the first thing that comes to mind is jumper cables and taking power from another battery. But the confusion is, how long to charge car battery with jumper cables?

About the answer, jumper cables are not designed to charge the battery. It can only help to start the engine. It is a matter of a few seconds to start an engine with the assistance of jumper cables.

After taking the ignition, the car engine will start recharging the battery with the help of an alternator. Now you have to drive your car for at least 20 minutes to recharge your car battery fully with the help of alternator.

So here we are with the entire answer to how long to charge car battery with jumper cables and how to connect the jumper cables correctly. Be with us till the end to avoid such an issue.

How Long To Charge Car Battery With Jumper Cables? – All The Vital Facts

The amount of time does not depend on cables. When you are using a set of jumper cables, it will help to start the car engine instantly. And if the engine is running, your battery is charging.

Now the time depends on your engine and your usage. Well, we do not  desire to keep you curious. But, you need to go through the explanation since it is utterly scientific and mechanical.

Use Jumper Cables To Charge A Battery From Another Battery

If you want to start your car engine with the help of jumper cables, you must maintain several steps properly. It will only take a few seconds to transfer the charge of the new battery.

But if you are forwarding towards charging your battery using jumper cables, you better stay back from that. It will decrease the donor battery’s charge, and eventually, both of the batteries will become equally charged.

For example, the donor or new battery has a 70% charge that starts an engine, and the dead battery has 20%. If we connect two batteries, the power will be transferred, and both will become 45%, which is inadequate to start an engine.

Working Mechanism Of Jumper Cables

The function of jumper cables is pretty straightforward. If you know the simple basics of physics, this is already known to you.

When we connect the jumper cables from point to point of both car batteries, the vehicle starts relying on the newly connected battery. After igniting the car, the engine takes energy from the newly connected battery and starts running.

When the engine’s crankshaft rotates, it operates the alternator through a belt, and now the alternator begins charging the dead battery. After 20 to 30 mins, the battery recharges 70% to 100%.

How To Connect Through Jumper Cables

No matter what you do in your life, everything must be done properly. When you use jumper cables, you must maintain the proper way.

• First, you must select a set of jumper cables which is good enough to serve electrical flow. For example, unbroken or stainless.
• Second, run the donor car for at least 10 minutes so that it can recharge its battery and not become dead after connecting the jumper cables.
• Thirdly, connect the red wire first with the red or positive point of the donor car battery. After that, connect the other end of the red jumper cable with the red or positive point of the dead battery.
• After that, connect the black cable with the donor battery’s black or negative point. And join the other end of the black cable with an unpainted metal of the car, which has the dead battery.

• Eventually, turn the ignition on, and you will see the engine will start running.

After a short while, like a min, unplug the cables. And the car engine will recharge the battery with the help of the alternator.

Connecting the Jumper Cables With Home Inverter

Connecting the jumper cable with your home inverter to charge the dead car battery will work like a set of normal wires. So, timing entirely depends on the inverter, not the cables. And the average time of recharging a dead battery is around 40 to 60 mins by home inverter.

The capacity of an ordinary car battery is generally 105 amps. So, according to our calculation, if your home inverter or charger serves as little as 10 amps per hour, it may take up to 11 hours to fully charge the dead battery.

But the frequent inverters in the market can serve from 88 to 105 amps and even more. So, 1 hour to 1.5 hours can be the highest time a car battery can consume. In easy words, the higher the inverter can serve, the less time it will consume to recharge the battery.

Things You Need To Keep In Consideration About Your Car Battery

Sometimes we face difficulties after maintaining all the steps properly. In that case, you have to consider some points related to battery before using jumper cables.

1. The water level of the battery. If the water level is below 80%, refill it. It helps to hold charge.
2. The expiry date of the battery. Batteries can last for several years. Yet, if the expiry date is gone, it means you have to change the battery.
3. If both of them above are fine, then you must check for the other issue by having help from an expert.

FAQ’s

Here we are trying to answer the frequently asked questions about how long to charge a car battery with jumper cables.

How Long Should It Take To Charge A Dead Car Battery With Jumper Cables?

If you connect the jumper cables with another car battery, it won’t recharge the battery. It will drain the healthy battery’s existing power, and eventually, both batteries will have the same energy.

But if you connect the dead battery with the inverter, it will take 30 to 40 mins to recharge fully.

How Long Should You Leave Jumper Cables On?

After connecting the jumper cables, if your engine is running after the ignition, you can disconnect the jumper cables. Your car’s alternator will instantly start charging your car battery, and it will be fully charged within 30 to 40 mins.

Conclusion

A jumper cable is not for charging. It can be an unwise idea to recharge your dead battery from a healthy battery. Hopefully, now you know how long to charge car battery with jumper cables.

On the other hand, you can use jumper cables to recharge your dead car battery by connecting those with the inverter or solar. It may take around 30 to 40 mins to charge fully.